UPower-Hi series is an inverter charger that supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can raise the system’s power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
| Item | UP2000-HM6021 | UP3000-HM10021 | UP3000-HM5041 | UP3000-HM8041 |
| Rated battery voltage | 24VDC | 48VDC | ||
| Battery input voltage | 21.6~32VDC | 43.2~64VDC | ||
| Max. battery charging current | 60A | 100A | 50A | 80A |
| Inverter output | ||||
| Continuous output power | 2000W | 3000W | 3000W | 3000W |
| Max. surge power(3S) | 4000W | 6000W | 6000W | 6000W |
| Output voltage range | 110VAC(-3%~+3%), 120VAC(-10%~+3%) | |||
| Output frequency | 50/60±0.2% | |||
| Output wave | Pure Sine Wave | |||
| Load power factor | 0.2-1(Load power ≤ Continuous output power) | |||
| Distortion THD | THD≤5%(Resistive load) | |||
| 80% rated output efficiency | 89% | 90% | 91% | 91% |
| Max. Rated output efficiency | 88% | 88% | 90% | 90% |
| Max. output efficiency | 90% | 92% | 92% | 92% |
| Switch time | 10ms(Switch from the utility output to the inverter output), 15ms(Switch from the inverter output to the utility output) | |||
| Utility charging | ||||
| Utility input voltage | 88VAC~132VAC (Default), 80VAC~140VAC(Programmable) | |||
| Utility input frequency | 40~65Hz | |||
| Max. utility charge current | 60A | 80A | 40A | 40A |
| Solar charging | ||||
| Max. PV open circuit voltage | 250V(At minimum operating environment temperature), 220V(At 25℃ environment temperature) | |||
| MPPT voltage range | 60~200V | |||
| Max. PV input power | 2000W | 3000W | 3000W | 4000W |
| (Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter 3.4 Operating mode for details.) | ||||
| Max. PV charging power | 1725W | 2875W | 2875W | 4000W |
| Max. PV charging current | 60A | 100A | 50A | 80A |
| Equalize charging voltage | 29.2V(AGM default) | 58.4V(AGM default) | ||
| Boost charging voltage | 28.8V(AGM default) | 57.6V(AGM default) | ||
| Float charging voltage | 27.6V(AGM default) | 55.2V(AGM default) | ||
| Low voltage disconnect voltage | 21.6V(AGM default) | 43.2V(AGM default) | ||
| Tracking efficiency | ≥99.5% | |||
| Temp. compensate coefficient | -3mV/℃/2V(Default) | |||
| General | ||||
| Surge current | 50A | 60A | 56A | 95A |
| Zero load consumption | <1.6A | <1.6A | <1.2A | <0.8A |
| (without PV and utility connection, turn on the load output) | ||||
| Standby current | <1.2A | <1.0A | <0.7A | <0.6A |
| (without PV and utility connection, turn off the load output) | ||||
| Mechanical Parameters | ||||
| Dimension(H x W x D) | 607.5×381.6x127mm | 642.5×381.6x149mm | 642.5×381.6x149mm | 642.5×381.6x149mm |
| Mounting size | 585*300mm | 620*300mm | 620*300mm | 620*300mm |
| Mounting hole size | Φ10mm | Φ10mm | Φ10mm | Φ10mm |
| Net Weight | 15kg | 19kg | 19kg | 19kg |
| Enclosure | IP30 | |||
| Relative humidity | < 95% (N.C.) | |||
| Environment temperature | -20℃~50℃ | |||
Product images are for illustrative purposes only and may not exactly match the actual item. All specifications and technical details should be verified using the official catalogs and datasheets provided by the respective manufacturer, as discrepancies may exist on this website.
Reviews
There are no reviews yet.